Carbon Remover

Powerful Solvent Emulsifier for Removal of Carbon Resins and Varnishes

PART # DA01 | 0731851223774

PHYSICAL DATA

Appearance: Brown liquid

Density: 1.1 @-20°C

Flash Point: over 61ºC

Corrosive action: None

APPLICATION

Break down and separates residual combustion products and by-products of distillation of mineral oils.

• Burner tips
• Heavy fuel heaters
• Filters for lubricants or fuel oils
• Heat exchange units in oil refineries
• Oil coolers
• Diesel engine injectors
• Machine parts: pistons, piston rings, valve springs, connecting rods, etc.

DIRECTIONS FOR USE

Soaking

• Burner tips
• Oil filters
• Diesel engine injectors
• Machine parts

Most deposits can be removed at room temperature. If deposits are particularly hard to dissolve, heat up to a maximum of 50°C in a properly ventilated area. The CARBON REMOVER tank has been specially devised so that cleaning, by soaking or by circulation, can be effected with maximum efficiency and minimum product volume.

Circulation

• Heavy oil heaters
• Heat exchange units in refineries
• Oil coolers

Blow compressed air or steam through the system to begin with to remove as much as possible the residual oil.

Please download Technical Information PDF at link in product's card.

© 2023 Uniservice Unisafe Srl | Marine Chemicals division | www.uniservicemarine.com | Email | T (+39) 010.711.395 | F (+39) 010.713.120

IMPORTANT NOTICE: While the descriptions, designs, data and information contained herein are presented in good faith and believed to be accurate, this information is provided for your guidance only. Because many factors may affect processing or application/use, we recommend that you do a test to determine the suitability of a product for your particular purpose prior to use. No warranties of any kind, either expressed or implied, including warranties of merchantability or fitness for a particular purpose, are made regarding products described or designs, data or information set forth, or that the products, designs, data or information may be used without infringing the intellectual property rights of others. In no case shall the descriptions, information, data or designs provided be considered a part of our terms and conditions of sale. Further, you expressly understand and agree that the descriptions, designs, data and information furnished by Uniservice Unisafe Srl hereunder are given gratis, and Uniservice Unisafe Srl assumes no obligation or liability for the description, designs, data and information given or results obtained, all such being given and accepted at your risk.

Air Cooler Cleaner

Cleaning of Diesel Engine Air Cooler

PART # DA02 | 0731851223781

PHYSICAL DATA

Appearance: Opalescent white liquid

Specific gravity: 1.1 @20°C

Flash Point: above 70°C (158°F). As solution: none

Corrosive action: Metal: none. Plastic, rubber, paint: make a preliminary test.

DESCRIPTION

Uniservice Unisafe AIR COOLER CLEANER (ACC) is a liquid blend of highly active cleaning and corrosion inhibiting compounds. ACC has been developed for safe, fast and economical in service cleaning of the air handling systems of turbo charged diesel engines. By using ACC, airborne contaminants which have been carried into and deposited on scavenger air trunks, air coolers and inlet valves are removed. Thus, all surfaces are kept clean and free of deposits.

• Keeps air cooler clean
• Maintains scavenge air system clean
• Stabilizes air cooler at continuous peak efficiency

APPLICATION

• By using ACC and Uniservice Unisafe ACC Injection System fouling of air coolers is reduced thus heat transfer and engine efficiency is improved. Pressure drop across the air cooler and air temperature after the air cooler are kept to a minimum.
• Fire hazards from the build-up of grease and residue are minimized.
• Down time and expense of periodic dismantling of the air handling system for cleaning is eliminated.
• Scavenging efficiency is improved by the reduction on of deposit build-up around scavenging ports.
• Water displacing surfactants incorporated in ACC form a mono molecular film throughout the air handling system which protects the metals and reduces the adherence of airborne contaminants.

DIRECTIONS FOR USE

Usage: ACC is suitable for all types of diesel engines. The ACC/fresh water mixture has no flash-point and cylinder lubrication is not impaired.

Dosage: See SUGGESTED DAILY USAGE TABLE on the Technical Information PDF.

HANDLING INSTRUCTION

Precautionary measures:

• Protect the eyes.
• ACC concentrate actually has a very high flash-point, but should be kept away from open fire.
• Should ACC come in contact with the skin, rinse off with plenty of water, and then rub in any oily cream.

Please download Technical Information PDF at link in product's card.

© 2023 Uniservice Unisafe Srl | Marine Chemicals division | www.uniservicemarine.com | Email | T (+39) 010.711.395 | F (+39) 010.713.120

IMPORTANT NOTICE: While the descriptions, designs, data and information contained herein are presented in good faith and believed to be accurate, this information is provided for your guidance only. Because many factors may affect processing or application/use, we recommend that you do a test to determine the suitability of a product for your particular purpose prior to use. No warranties of any kind, either expressed or implied, including warranties of merchantability or fitness for a particular purpose, are made regarding products described or designs, data or information set forth, or that the products, designs, data or information may be used without infringing the intellectual property rights of others. In no case shall the descriptions, information, data or designs provided be considered a part of our terms and conditions of sale. Further, you expressly understand and agree that the descriptions, designs, data and information furnished by Uniservice Unisafe Srl hereunder are given gratis, and Uniservice Unisafe Srl assumes no obligation or liability for the description, designs, data and information given or results obtained, all such being given and accepted at your risk.

FilterClean

Liquid Cleaning Agent for Removal of Partially Carbonized Oils Using Circulation Method

PART # DA03 | 0731851223798

PHYSICAL DATA

Specific gravity: 1.04

Flashpoint PM CC : 62ºC

pH (1% solution): 8.7

APPLICATION

FILTERCLEAN is mainly used for the cleaning of permanently fixed oil coolers, oil pre-heaters and metal-ceramic oil filters. These units are regularly contaminated by particles in the oil and partially carbonized oils. Timely cleaning prevents the formation of coke-like adherents which are difficult or impossible to remove.

DIRECTIONS FOR USE

FILTERCLEAN is used undiluted at cleaning temperatures not exceeding 60° C. The cleaning effect is obtained by filling and/or circulating the product. Cleaning will take 8 to 24 hours depending upon the degree of contamination.

FILTERCLEAN is a light brown coloured fluid. Its formula includes chlorinated aromatic hydrocarbons. Plastics and rubber should first be tested for chemical attack. The product may also attack paints and lackers.

Please download Technical Information PDF at link in product's card.

© 2023 Uniservice Unisafe Srl | Marine Chemicals division | www.uniservicemarine.com | Email | T (+39) 010.711.395 | F (+39) 010.713.120

IMPORTANT NOTICE: While the descriptions, designs, data and information contained herein are presented in good faith and believed to be accurate, this information is provided for your guidance only. Because many factors may affect processing or application/use, we recommend that you do a test to determine the suitability of a product for your particular purpose prior to use. No warranties of any kind, either expressed or implied, including warranties of merchantability or fitness for a particular purpose, are made regarding products described or designs, data or information set forth, or that the products, designs, data or information may be used without infringing the intellectual property rights of others. In no case shall the descriptions, information, data or designs provided be considered a part of our terms and conditions of sale. Further, you expressly understand and agree that the descriptions, designs, data and information furnished by Uniservice Unisafe Srl hereunder are given gratis, and Uniservice Unisafe Srl assumes no obligation or liability for the description, designs, data and information given or results obtained, all such being given and accepted at your risk.

Solvent CR-E

Powerful Solvent Emulsifier for Removal of Heavy Oils

PART # DA04 (25L) 0731851223804 / (200L) 0731851223811 / (1000L) 0731851223828

PHYSICAL DATA

Appearance: Yellow liquid

Density: 0.88 @20°C

Flash Point: over 65°C

Corrosive action: None

DESCRIPTION

• Powerful solvent emulsifier.
• Heavy duty DPP remover
• Cleans down to metal surfaces
• Fast and effective usage

APPLICATION

Break down and separates residual combustion products and by-products of distillation of mineral oils.

• Heavy fuel heaters
• Filters for lubricants or fuel oils
• Heat exchange units in oil refineries
• Oil coolers
• Machine parts: pistons, piston rings, valve springs, connecting rods, etc.

DIRECTIONS FOR USE

Soaking:

• Burner tips,
• Oil filters,
• Machine parts.

Most deposits can be removed at room temperature. If deposits are particularly hard to dissolve, heat up to a maximum of 50°C in a properly ventilated area.

Circulation:

• Heavy oil heaters
• Heat exchange units in refineries
• Oil coolers

Blow compressed air or steam through the system to begin with to remove as much as possible the residual oil.

Please download Technical Information PDF at link in product's card.

© 2023 Uniservice Unisafe Srl | Marine Chemicals division | www.uniservicemarine.com | Email | T (+39) 010.711.395 | F (+39) 010.713.120

IMPORTANT NOTICE: While the descriptions, designs, data and information contained herein are presented in good faith and believed to be accurate, this information is provided for your guidance only. Because many factors may affect processing or application/use, we recommend that you do a test to determine the suitability of a product for your particular purpose prior to use. No warranties of any kind, either expressed or implied, including warranties of merchantability or fitness for a particular purpose, are made regarding products described or designs, data or information set forth, or that the products, designs, data or information may be used without infringing the intellectual property rights of others. In no case shall the descriptions, information, data or designs provided be considered a part of our terms and conditions of sale. Further, you expressly understand and agree that the descriptions, designs, data and information furnished by Uniservice Unisafe Srl hereunder are given gratis, and Uniservice Unisafe Srl assumes no obligation or liability for the description, designs, data and information given or results obtained, all such being given and accepted at your risk.